Hitachi CP-X200 CP-X300 Operating Manual page 41

Hide thumbs Also See for CP-X200 CP-X300:
Table of Contents

Advertisement

OPTION Menu (continued)
Item
AUTO OFF
LAMP TIME
FILTER TIME
(continued on next page)
Using the ▲/▼ buttons adjusts the time to count down to
automatically turn the projector off.
Long (max. 99 minutes)  Short (min. 0 minute = DISABLE)
When the time is set to 0, the projector is not turned off automatically.
When the time is set to 1 to 99, and when the passed time with no-
signal or an unsuitable signal reaches at the set time, the projector
lamp will be turned off.
If one of the projector's buttons or the remote control buttons
is pressed or one of the commands (except get commands) is
transmitted to the CONTROL port during the corresponding time,
projector will not be turned off.
Please refer to the section "Turning off the power" (15).
The lamp time is the time counted after the last resetting. It is
shown in OPTION menu as the usage time of the lamp.
Pressing RESET button or the ► button displays a dialog.
To reset the lamp time, select RESET using the ▲ button.
RESET  CANCEL
• Please reset the lamp time only when you have replaced the lamp,
for a suitable indication about the lamp.
• For the lamp replacement, see the section "Lamp" (51).
The filter time is the time counted after the last resetting. It is shown
in the OPTION menu as the usage time of the air filter.
Pressing the RESET button or the ► button displays a dialog.
To reset the filter time, select the RESET using the ▲ button.
RESET  CANCEL
• Please reset the filter time only when you have cleaned or replaced
the air filter, for a suitable indication about the air filter.
• For the air filter cleaning, see the section "Air filter" (53).
Description
OPTION Menu
41

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cp-x400Cp-x300

Table of Contents