Advertisement
Failure t ocomply w iththese instructions could
result i n
a fire or explosion that could cause
serious bodily injury, death or property damage.
Spiders and small insects can spin webs and
nest
in the grill burner tubes during transit and
warehousing
which can lead to a gas flow
obstruction
resulting in a fire in and around the
burner tubes. This type of "FLASHBACK FIRE"
can cause serious grill damage and create an
unsafe operating condition for the user.
To reduce the chance of a FLASHBACK FIRE
you must clean the burner tubes as follows
before
initial use. Also do this at least once a
month in summer and fall or whenever spiders are
active in your area, and if your gril has not been
used for an extended period of time.
1. Remove the screw from the rear of each burner
using a Phillips head screwdriver.
2.Carefully
lift each burner up and away from the
gas valve orifice.
3.Check and clean the burner tubes for insects and
insect nests. A clogged tube can lead to a fire
beneath the grill.
4.Refer to the figure below and perform one of
these 3 cleaning methods:
[]
METHOD
1: Bend a stiff
wire
or wire
coat
hanger
into a small hook as shown
and run
the hook through the burner tube and inside
the burner
several
times
to remove
debris.
[]
METHOD 2:
Use a bottle brush with a flexible
handle and run the brush through the burner
tube and inside the burner several times to
remove any debris.
[]
METHOD 3: Use an air hose to force air through
each burner tube. The forced air should pass
debris or obstruction
through the burner and
out the ports.
For safe operation ensure the gas valve assembly
orifice is inside the burner tube before using
your grill. See figure. If the orifice is not inside the
burner tube, lighting the burner may cause an
explosion and/or fire resulting in serious bodily
injury and/or property damage.
Liquid Propane Gas (LPG) grill models must be
used with the liquid propane gas regulator
assembly supplied. Any attempt to convert the
grill from one fuel type to another is extremely
hazardous and will void the warranty.
Never
use your gas grill in a garage, porch,
shed, breezeway or any other enclosed area.
Never obstruct the flow of ventilation
air
around your gas grill cabinet.
Never
disconnect the gas regulator assembly
or any gas fitting while your grill is lit. A lit grill
can ignite leaking gas and cause a fire or
explosion which could result in property
damage, personal injury or death.
Keep the gas regulator
hose away from any
heated surface and dripping grease. Avoid
unnecessary
twisting of the hose. Visually
inspect the hose prior to each use for cuts,
cracks, excessive wear, or other damage. If
the hose appears damaged, do not use the gas
grill.
Call Sears at 1-800-4-MY-HOME@
(1-800-469-4663)
for a Kenmore replacement
gas hose assembly.
PRE-ASSEM
BLY
Read and perform
the following
pre-assembly
instructions:
[]
Tools Required for Assembly
include:
• protective work gloves
• protective eyewear
• Phillips Head Screwdriver
(included in
hardware pack in Parts Box)
[]
You will need assistance from another person to
handle the grill head and other large, heavy parts.
[]
[]
[]
[]
Open lid of shipping carton and remove parts box
and packing materials. Lay a cardboard sheet on
floor and use as a work surface to protect floor and
grill parts from scratches.
Slice all four corners with a utility knife to lay open
the carton. This allows you to remove the grill
head and components
packed inside.
Use the Hardware and Part Diagrams to ensure all
items are included and free of damage.
Do not assemble or operate the grill if it appears
damaged.
If there are damaged or missing parts
when you unpack the shipping box or you have
questions during the assembly process, call the:
Customer
Support Center at 1-800-933-0527
8:30am-S:OOpm
CST, Monday through
Friday.
Advertisement
