Disassembling The Sl10; Necessary Tools; Disassembling The Mobile - Siemens SL 10 Service Manual

Private communication systems mobile phones

Hide thumbs Also See for SL 10:

Table of Contents

3.2Disassembling the SL10

Caution!

Inside the telephone there are three flexible cables, which are very sensitive to any kind of

mechanical damage. Please be careful during all the disassembling process not to damage

them e.g. by bending or snapping.

For disassembling the SL10 the following tools are

mandatory:

- Metal blade

- Catch lever

- Screwdriver Torx 6

- Tweezer

1. Remove battery and SIM-Card

2. Unscrew antenna.

1. Remove the two countersunk-head screws at the lower end of the telephone (below vent plug) and inside

the battery department.

2. Move slide all the way to the open position.

3. Undo the slide stop by inserting the metal strip on the left side between the slide

and the base.

1. Turn the mobile over and push the metal strip through until it is visible above the keypad.

Service Manual SL10

Sm_sl10_lvl2_v11.doc

Private Communication Systems

V1.1

Page 6 of 23

Mobile Phones

PN MP ST

R. Fleuren

05/98

Table of Contents