Connection/Installation Basic safety instructions Warning: Danger of death through electric shock or fire! • Installation should only be carried out by a qualified electrician • Disconnect power source. • Cover or shield any adjacent live components • Ensure device cannot be switched on •...
Designated use with the provisions of EN 50428 for switches Connect cable or similar installation equipment for use in The time switch can be used for lighting, bell Strip cable by 8 mm (max. 9 mm). building construction technology. Tampering systems, ventilation etc.
Connections Programming individual address Operation of Display and keys 1. Press push button on front of device. Program display RC GPS 2. The programming LED lights up. Programmed 3. The device is now in program mode switching times Time display RC DCF Weekday and Start-up, diagnostics, configuration and...
Menu selection overview MENU PROGRAM SIMULATION TIME/DATE MANUAL OPTIONS CHOOSE CHOOSE TIME CHOOSE ASTRO CHANNEL C1 CHANNEL C1 CHANNEL C1 STANDARD EXTRA START YEAR DATE PERMANENT ON OPERATING PROGRAM P0 PROGRAM 2013 HOUR COUNTER P1–P16 PERMANENT OFF LANGUAGE 2013 SUMMER- START MONTH WINTER RULE OVERRIDE ON...
Initial start-up Time switch programs and astronomical programs With the 8-channel 365-day digital timeclock, time switch or astronomical programs can be Set date, time and summer/winter time rule ENGLISH programmed and switched optionally for each channel. Press required key and follow display on FORM DATE screen (see figure).
Program menu Example: Switch on sports hall lighting from Mon-Fri, 7:30 to 12:00 hrs Program standard program P0 switching times. Program switching times 8. Use the 1. Press MENU. PROGRAM is displayed. keys to enter hour, minute, (07:30) and confirm 2.
Request/modify/delete switching times request/change/delete standard program P0 switching times. 1. Press MENU. 8. Confirm by pressing OK. MENU PROGRAM PROGRAM is displayed. NEXT is displayed. CHOOSE 2. Confirm by pressing OK. 9. Press to select MODIFY CHANNEL STANDARD (or DELETE) to modify or delete 3.
Delete switching times Program pulse time MENU PROGRAM MENU PROGRAM CHOOSE CHOOSE CHANNEL CHANNEL STANDARD STANDARD PROGRAM PROGRAM CHECK- DELETE MODIFY- P0 ALL SWITCH TIME PULSE CYCLE DELETE CONFIRM DELETE DELETED SET HOUR ON 8.05 SAVE EVERY DAY MONDAY SET MINUTES Delete all standard program P0 switching times.
Program pulse time. Program cycle time Standard and extra programs Example: Switch on pause signal on Monday 8:05 hrs for 5 sec. In addition to switch-ON and switch-OFF The standard program P0 (weekly program times (switch time) and short time pulses with switching times, pulse and cycle times 1.
Page 12
The following date ranges can be set in Examples of calendar-dependent date ranges: • Date with serial pattern Extra program P1-14 Time switch channel parallel: (Time limit series) • Fixed date range • Active in the programmed date ranges as from October 2013 to be carried out •...
Example: The standard program switches Example: The car park lighting is switched Simulation menu on the street lighting independent of the ON and OFF at fixed times on Monday to The Simulation allows you to manually step MENU SIMULATION astro times. A night time interruption is Friday according to astro times.
Time/Date menu Manual menu TIMER SHORT TERM CIRCUIT, HOLIDAY, RANDOM as well as ACTIVATE EXTRA In the TIME/DATE menu the TIME, DATE, Press MEnU. Using select DATE/TIME In the MANUAL menu, manual switch PROGRAM the manual switching can be SUMMER WINTER RULE, WEEKDAY and follow the indications on the display.
Manual and permanent switching Options menu Manual and permanent switching can be set In the OPTIONS menu the submenus ASTRO, using the MANUAL menu. OPERATING HOUR, LANGUAGE, PIN, LCD ILLUMINATION, FACTORY SETTINGS as • Manual switching well as INFO can be requested. Reversing the channel status to the next Press MEnU.
Set astro programs If astro times are active… If a time switch program is active… Press MEnU. Using select OPTIONS and MENU follow the indications on the display. OPTIONS MENU You will automatically be taken to the setting ASTRO for the POSITION data (COUNTRY or OPTIONS COORDINATES input) and the ASTRO ASTRO...
Page 17
In the OPTIONS > ASTRO submenu after a This means that the astro ON and OFF POSITION • Own astro table (with OBELISK channel has been changed to astro program, switching time can be adapted to program) • Setting of the location using coordinates it is possible to request or change ASTRO local conditions (e.g.
POSITION Enter PIN code The PIN-Code is set in OPTIONS CONTINUED via the menu. If you have lost your PIN call the LightMaster Hotline. CHOOSE CHANNEL ASTRO TIMES OFFSET ASTRO MODE CHANGE TO MENU OPTIONS TIME SWITCH OFFSET EVENING ON...
Memory card Copy OBELISK to TIME SWITCH This copies the switching program Use memory card (see fig.) (all standard and special programs) and • Insert memory card in the time switch. optionally all timeclock settings (e.g. position, • Read/read out saved switching times and offset, external input, time format etc.) from device settings in the time switch or start the memory card to the timeclock.