Table of Contents
Advertisement
Internet Server User's Guide
Diagnostic LED Descriptions
The internet server has an LED array for indicating current port
and transmission status and is shown below.
•
Power
◊ ON: "power good".
◊ OFF: "power bad." Check to see if the AC power adapter is
properly connected, or if the correct AC power adapter is
being used.
•
Collision
◊ Blinking: Packet collision is occurring. Packet collisions
are not an abnormal situation. Collisions occur when two
or more computers transmit packets on the network simul-
taneously, and a contention takes place on the network
line.
transmission. This trial-and-error process is repeated until
no collision takes place. Note: Excessive collisions may re-
sult when multiple hubs are cascaded through a thin
coaxial segment and many stations are connected on the
network.
◊ Off: No packet collision.
•
Link/Rx (for each UTP port)
10
DP-692 Front Panel LEDs
The computers should then back off, then retry
Installation
Advertisement
Table of Contents
