Table of Contents
Advertisement
• Do not block
air openings
or
place air cleaner
on soft surface
such as bed or sofa. This could
cause
air cleaner
to tip over,
blocking
air intake
opening.
• Place
air cleaner
on a fiat, level
surface
at least 6 in. (15.2 cm)
away from heat
sources
such as
ranges
or heaters.
• This product
is intended
for
indoor
use only.
6" (15.2 cm) Min.
Clearance
NOTE:
Before
operating
air cleaner,
record
date
of installation
on HEPA filter so
you can replace
it annually.
To remove
and replace
HEPA filter, see the "Filter
Replacement"
section.
Using the Controls
Power On/Off
1. Plug into a grounded
3 prong outlet.
2. Press
POWER
ON/OFF
to start the
air cleaner.
3. Press
FAN SPEED
to select
desired
speed.
4. Press
POWER
ON/OFF
to stop the
air cleaner.
Sleep
Press
SLEEP/LOCK
to set the fan
speed
to Low for 8 hours.
The air
cleaner
will then
return
to the previously
selected
setting.
Control
Lock
Locks
the controls
to prevent
accidental
changing
of the settings.
1. Press and hold SLEEP/LOCK
for
5 seconds
to set the Control
Lock.
2. Press SLEEP/LOCK
for 5 seconds
to
unlock
the controls.
Filter
Status
Lights
The Pre-Filter
and HEPA Filter
status
lights will help you know
when to
change
your filters.
The green
status
lights will move from
New to Change
at
pre-set
intervals.
When
the red Change
status
light is flashing,
replace
the filter
as indicated.
See the "Filter
Replacement"
section.
- Quick Links:
- Using the Controls
- Filter Replacement
Hide quick links:
Advertisement
Table of Contents
