Pairing Methods; Unpairing - Motorola LI4278 Product Reference Manual
Hide thumbs
Also See for LI4278:
- Reference manual (452 pages) ,
- Product reference manual (450 pages) ,
- Pairing manuals (14 pages)
Table of Contents
Advertisement
RADIO COMMUNICATIONS 4 - 23
To use Lock Override, scan the bar code below, followed by the pairing bar code on the cradle.
Lock Override
Pairing Methods
Parameter # 545
There are two pairing methods. The default method allows the linear imager scanner and cradle to pair
(connect) when the pairing bar code on the cradle is scanned. A second method pairs the linear imager
scanner and cradle when the linear imager scanner is inserted in the cradle. To enable this feature, scan
Enable Pair On Contacts below. With this feature enabled it is not necessary to scan the pairing bar code on
the cradle. If the pairing is successful, a low/high connection beep sequence sounds a few seconds after the
linear imager scanner is placed in the cradle. See
for other beep
Wireless Beeper Definitions on page 4-3
sequences.
To enable or disable pairing on contacts, scan the appropriate bar code below.
*
Enable Pair On Contacts
(1)
Disable Pair on Contacts
(0)
Unpairing
Unpair the linear imager scanner from the cradle or PC/host to make the cradle available for pairing with
another linear imager scanner. Scan the bar code below to disconnect the linear imager scanner from its
cradle/PC host.
An unpairing bar code is also included in the LI4278 Quick Reference Guide.
Unpairing
- Quick Links:
- Scanner Configurations
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
