Testing The Connection To A Device - HP 800 User Manual
Network access controller
Hide thumbs
Also See for 800:
- User manual (586 pages) ,
- Manual (106 pages) ,
- Installation manual (34 pages)
Table of Contents
Advertisement
NOTE:
NOTE:
•
HP ProCurve switch – See "HP ProCurve Switch" on page 3-73.
HP ProCurve WESM – See "HP ProCurve WESM" on page 3-76.
•
HP ProCurve 420/530 AP – See "HP ProCurve 420 AP or HP ProCurve
•
530 AP" on page 3-79.
•
Nortel – See "Nortel" on page 3-81.
Other – See "Other" on page 3-83.
•
7.
Click ok.
Testing the Connection to a Device
To test the connection to an 802.1X device:
NAC 800 home window>>System configuration>>Quarantining>>802.1X
Quarantine method radio button
You must have already added devices for them to appear in the 802.1X devices
area. You can also test the device as you add it.
1.
In the 802.1X devices area, click edit next to the device you want to test.
The 802.1X device window appears. The Test connection to this device area
is near the bottom of the window:
Figure 3-27. Add 802.1X Device, Test Connection Area
2.
Optional: If you want to include the re-authentication command as part
of the test, select the Re-authenticate an endpoint during test check box
and:
Enter the port of the endpoint being tested in the Port text field.
a.
b. Enter the MAC address of the endpoint being tested in the MAC
address text field.
You must enter the port, the MAC address, or both, depending on the re-
authentication OID.
System Configuration
Quarantining
3-61
Advertisement
Chapters
Table of Contents
