Table of Contents
Advertisement
5. Erase the malfunction history in the diagnos-
tic mode. Refer to "Diagnostic code table (Di-
agnostic code No. Sh_ _62)".
NOTE:
Turning the main switch to "OFF" will not erase
the malfunction history.
ET2D21031
DIAGNOSTIC MODE
Setting the diagnostic mode
1. Turn the main switch to "OFF".
2. Remove the front cowling left inner panel 1 to access the YCC-S test coupler "1".
3. Remove the protective cap from the YCC-S test coupler.
4. Connect the test coupler adapter "2" to the YCC-S test coupler.
Test coupler adapter
90890-03149
5. Push and hold the hand shift select button "1", turn the main switch "2" to "ON", and continue to push
the button for 8 seconds or more.
NOTE:
• All displays on the meter disappear except the odometer/tripmeter/fuel reserve tripmeter displays.
• "Sh_ _61" appears on the odometer/tripmeter/fuel reserve tripmeter LCD.
6. Select the diagnostic code number corresponding to the fault code number by pushing the hand shift
select button and operating the brake lever (or brake pedal) simultaneously.
7. Turn the main switch to "OFF" to cancel the diagnostic mode.
YCC-S (Yamaha Chip Controlled-Shift) SYSTEM
1
– 95 –
2
1
2
- Quick Links:
- Electrical Specifications
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
