Table of Contents
Advertisement
Quick Links
The lightning flash with an arrowhead symbol, within an equilateral
triangle is intended to alert the user to the presence of uninsulated
dangerous voltage within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
INFORMATION - This equipment has been tested and found to comply with
limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
his own expense.
WARNING - Changes or modifications not expressly approved by the
manufacturer could void the user's authority to operate the equipment.
CAUTION : To prevent electric shock and risk of fire hazards:
Do NOT use power sources other than that specified.
Do NOT expose this appliance to rain or moisture.
This installation should be made by a qualified service person and
should conform to all local codes.
3
Digital Day&Night Color Camera
Advertisement
Table of Contents
Related Manuals for Sony CAM-90
Summary of Contents for Sony CAM-90
- Page 1 The lightning flash with an arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
-
Page 2: Features
Horizontal Resolution 540 TV High Sensitivity Contact an authorized technician for inspection. Lines The built-in high sensitivity SONY COLOR Clear image quality has been achieved by CCD enables a clear image even in employing a SONY CCD with 410,000 Stop using your camera when you find a malfunction. -
Page 3: Table Of Contents
Contents Features Camera operation Menu Warnings and precautions Settings • LENS (selection) Components • SHUTTER (condition and speed control) Names and functions of parts • WHITE BALANCE control Front • BACKLIGHT (Backlight Compensation) Bottom • AGC (Auto gain compensation) Back •... - Page 4 Precautions Do not install the camera in Do not install or use the camera in an Do not drop the camera or subject Never keep the camera face to extreme temperature conditions. environment where the humidity is high. it to physical shocks. strong light directly.
-
Page 5: Components
Components Names and Functions of Parts Front 1. COLOR DOME CAMERA 2. Auto iris lens connection plug 3. L-Wrench 3. C-Mount adaptor Lens protection cap Please cover the lens when not using it. CS-Mount lens adaptor Please attach the CS-Mount lens here. Back Focus clamp screw 4. -
Page 6: Names And Functions Of Parts
Names and Functions of Parts Names and Functions of Parts Bottom Back Auto iris lens connector This is the connection terminal for the auto iris lens. Auto iris lens selection switch Please change the mode to DC or VIDEO depending on the type of Mounting bracket screw hole auto iris lens being used. -
Page 7: Installation
Installation Installation 3. Please remove the cover of the auto iris lens connection plug and solder Menu the lens cable to the connector pin in the plug. Lenses are sold separately. Lenses such as auto iris lens, LENS CS-Mount lens and C-Mount lens can be used. Pin No. -
Page 8: Connecting To A Monitor
Installation When using a CS-Mount lens Connecting to a monitor Please take off the lens protection cap and attach Please connect the video output terminal located on the back of the the CS-Mount lens to the camera by screwing it in camera to the monitor. -
Page 9: Camera Operation
Camera Operation Menu Settings Settings can be made using the 5 buttons located in the back of the camera. SETUP menu LENS (selection) MANUAL DC/VIDEO SHUTTER MANUAL (condition and speed control) WHITE BALANCE control MANUAL BACKLIGHT MIDDLE (Backlight compensation) HIGH AGC (Auto Gain control) MIDDLE 1. -
Page 10: Lens (Selection)
Camera Operation DC : Auto iris lens selection SETUP Select any function you LENS MANUAL Modes can be changed Note wish to operate by using the LEFT and SHUTTER using the UP and RIGHT buttons. WHITE BAL. DOWN buttons. BACKLIGHT •... -
Page 11: Shutter (Condition And Speed Control)
Camera Operation WHITE BALANCE control SHUTTER (condition and speed control) Auto or manual control can be selected. The screen color can be adjusted by using the WHITE BALANCE function. 1. When the SETUP menu is on the screen, please position the arrow to 1. -
Page 12: Backlight(Backlight Compensation)
Camera Operation AGC (Auto Gain Control) BACKLIGHT(Backlight Compensation) When there is a strong backlight behind the object, clear images of the 1. Please position the arrow to point to 'AGC' on the SETUP menu by using background as well as the object can still be obtained by using the the UP and DOWN buttons. -
Page 13: Dnr (Digital Noise Reduction)
Camera Operation DNR (Digital Noise Reduction) The background noise in the low light level decreases automatically as the 1. Please position the arrow to point to 'SENS UP' on the SETUP menu by level of gain changes. using the UP and DOWN buttons. 2. -
Page 14: Special
Camera Operation SPECIAL 1. Please position the arrow to point to 'SPECIAL' on the SETUP menu by 3) Please press the SETUP button. using the UP and DOWN buttons. 2. Please select the mode you wish to operate by pressing the UP or DOWN button. - Page 15 Camera Operation Note 5) When a name has been chosen, please select a position for the name display. • When the AGC is turned off, COLOR does not operate. Please move the cursor onto 'POS' and then press the SETUP button. •...
-
Page 16: Exit
Camera Operation • lease select the area you do not wish to appear from the 4 areas in AREA MOTION DETECTION: SEL mode. This product has a feature that allows you to observe movements of objects in • Please select ON mode for the chosen area. 4 different areas on the screen, and the words 'MOTION DETECTED' appear •... -
Page 17: Troubleshooting
Troubleshooting If there are problems in operation, please refer to the items below. If the problem Problems Troubleshooting persists, please contact the agent you purchased this product from. The MOTION • Please check if 'MOTION DETECTION' mode DETECTION function is is turned on. -
Page 18: Specifications
Specifications Warranty MACE Security Product Warranty Item NTSC AC24V/DC12V AC24V/DC12V Power Source Mace will repair or replace, without charge, any merchandise proved 170mA(AC24V) / 260mA(DC12V) 170mA(AC24V) / 260mA(DC12V) defective in material or workmanship for a period of one year after the date Total Pixels 811(H) x 508(V) 795(H) x 596(V) - Page 19 MENO...
-
Page 20: Digital Day&Night Color Camera
Digital Day & Night Color Camera Model : CAM90 Instruction Guide MACE Electronic Surveillance Products 3233 SW 2nd Ave. Fort Lauderdale, FL 33315 USA toll-free(877)585-MACE local(954)585-6223 fax(954)585-6225 www.mace.com MACE Electronic Surveillance Products...