Step 10: Connect Pc; Step 11: Initialize Rwiu; Step 12: Install Rwiu Manager - Toshiba Strata AirLink Installation Manual
Digital business telephone systems
Hide thumbs
Also See for Strata AirLink:
- User manual (132 pages) ,
- User manual (47 pages) ,
- User manual (48 pages)
Table of Contents
Advertisement
RWIU System Installation
Step 10: Connect PC
Step 10: Connect PC
➤
Run the RS-232-C cable to the back
of the PC (COM port 1) and insert
the 6-pin connector into the RWIU
jack (see
Step 11: Initialize RWIU
1. Open the RWIU Manager software.
2. Turn on the Strata DK. The RWIU checks Base Station status and connections.
3. Check the LEDs on the Base Stations. If all the LEDs are OFF, the initialization is complete.
4. Check the handsets for dial tone. If there is dial tone, the initialization is complete.
Step 12: Install RWIU Manager
1. Check the PC hardware/
software against the required
minimums.
2. Close any open applications
in Windows.
3. Insert the RWIU Manager
floppy disk into the A:\ drive.
4. In Windows 98/95, click Start
and Run
...or in Windows 3.11/3.1,
open Program Manager and
click File and Run.
5. Type A:\Setup and click
OK.
6. Click Yes
...or No if applications need
to be closed.
7. Click OK
...or change the destination
drive/directory.
52
Figure
4-1).
RWIU (side view)
RS-232-C 6-pin Jack
Figure 4-1
RWIU 6-pin Jack
Refer to
"Check System Hardware and Software
Requirements"
on
Page
6.
A dialog box displays requesting the location of the setup
disk.
The Windows setup screen warns Windows applications
should be closed.
A dialog box displays recommending a destination path of
C:\Wireless.
C:\Wireless is accepted as the destination directory.
Strata AirLink Installation Guide
3333
5/00
Advertisement
Table of Contents
Troubleshooting
