Table of Contents
Advertisement
Administration
Distinctive Ringing
3.13 Distinctive Ringing
170
|
--- Admin
|--- General Information
|--- Dial plan ID
|--- Dial plan status
Related Topics
The SIP server may provide information indicating a specific type of call within an
incoming call. The phone can use this information to choose a ring tone according
to the call type.
The relevant information is carried as a string in the SIP Alert-Info header. This
string is configured in the OpenScape Voice system; please refer to the relevant
OpenScape Voice documentation. When the string sent via Alert-Info matches
the string specified in the Name parameter, the corresponding ringer is triggered.
For instance, the OpenScape Voice system may send the string Bellcore-dr1
to indicate that a call is from within the same business group, and the Name
parameter is set to "Bellcore-dr1". To select a specific ring tone for calls from the
same business group, the other parameters corresponding to that Name must be
set accordingly.
The Ringer sound parameter determines whether a pattern, i. e. melody, or a
specific sound file shall be used as ringer.
Pattern Melody selects the melody pattern that will be used if Ringer sound is
set to "Pattern".
Pattern sequence determines the length for the melody pattern, and the interval
between the repetitions of the pattern. There are 3 variants:
•
"1": 1 sec ON, 4 sec OFF
•
"2": 1 sec ON, 2 sec OFF
•
"3": 0.7 sec ON, 0.7 sec OFF, 0.7 sec ON, 3 sec OFF
The Duration parameter determines how long the phone will ring on an incoming
call. The range is 0-300 sec.
With the Audible parameter, the ringer can be muted. In this case, an incoming
call will be indicated only visually.
Special Ringers can be configured for the following call types:
•
Internal
•
External
•
Recall
OpenScape Desk Phone IP, Phone Administration, Administrator Documentation
A31003-D3000-M100-01-76A9, 02-2013
Advertisement
Table of Contents
Troubleshooting
