Table of Contents
Advertisement
i
I
CD CHANGER
MECHAN
DURING PLAY
SM OPERATION
DESCRIPTION
Gear
for
initial
opening
operation
and
disc case storage
d
Locks and
movement
starts
I @'x2--1
OPEN
1
\
Gear
for opening
operation
.
At initial docking, the plate gear moves the tray, then movement is
continued by the opening gear.
c.
LOADING
TABLE
MOVEMENT
+
"OPEN"
.
As it moves, the loading table performs
the following
operations.
(1) [t removes the binder from the centering hold lever (322).
(2) It moves the cover plates (425, 427) so that the disc stopper (424) rises up and stabilizes the disc setting.
(3) It sets the OPEN/CLOSE
switch (399) to the "OPEN ON" position.
d.
LOADING
TABLE
MOVEMENT
-+ "CLOSE"
.
After putting the disc in place and pushing the loading table (431} with your hand, the OPEN/CLOSE
switch
moves to the "OFF"
position, the loading motor reverses, and the loading table begins to move, performing the
following operations.
(1) It lowers the disc stopper (424).
(2) When the disc sensors (345, 450) are triggered, the turntable starts up after operation (3), and the TOC is read.
(3) The loading table guide (355) disengages
the loading table lock lever (430).
This undoes the link between the loading table and loading plate.
e.
LOADING
PLATE
MOVEMENT
+
"CLOSE"
The loading motor moves the "FREE'" loading plate toward the "CLOSE"
position,
causing it to perform the following operations.
(1) [t inserts a CD into the disc case and moves the loading completed
switch (314) to the "OFF" position.
(2) Hooks a and b on the loading plate clamp the CD.
(3) Press the POWER button to switch off the power supply and cancel the service mode.
-16-
Hide quick links:
Advertisement
Chapters
Table of Contents
