Table of Contents
Advertisement
I Drurunilu
1 )
2)
3 )
. u )
6 )
8 )
e)
4)
Undo screw Q
to remove
the bonnet
case.
10) To remove the front panel base, undo screw
(|
and slightly lower the panel stayhook
d-("pp"t
four portions) and hookQ(lower
i*o
po*ions) using a flat screwdriver, etc'
11) The tape counter is removed by removing
scïew (p .
tzl
The panel stay is removed by removrng
screw O
.
13) The display assembly is remored by remov-
ing the panel stay hook (without having to
remoue ihe front Panel assemblY)'
14) The push and PC knobs are detachable
from the display assembly when the latter
is removed.
15) The eject knob is removed by removing the
hook on the back of the Panel staY'
16) Remove scïe\il @
to dismount the casset-
tE mechanism unit (the removal of the
power knob assembly enables the mecha'
nism unit to be dismounted without requir-
ing the front panel assembly to be re-
moved).
Remove screîv @ to dismount the stay'
For the removal of the bottom plate, re-
move screw O ot the bottom of the set'
This allows the soldering on the composite
assemblv (B) to come into view'
Removing rivet () and screw @ on the
,"a, pat"i causes the P.C.B. holder to be un-
fastened, enabling DOLBYINR
assembly
to be detachable.
The complex assembly (B) ^can be dis-
mounted 6y removing screw @
Removing screw (D ut well as trgok @ on
PB support permits the power supply as-
sembly to be dismounted. Then, the power
knob assembly can be removed from the
power supPlY assemblY.
Wttett the power supply assembly is remov-
ed, the transistor assembly comes into view'
Remove screws to dismount the transistor
assembly.
Undo screw @ ott its lower portion to re-
move the transformer.
For the removal of door panels A and B,
slide the panels upward with the doors kept
open.
7')
Advertisement
Table of Contents
