Station Hunting Type - Panasonic KX-TA624 Installation Manual
Advanced hybrid system
Hide thumbs
Also See for KX-TA624:
- Installation manual (437 pages) ,
- User manual (234 pages) ,
- Operating instructions manual (40 pages)
Table of Contents
Advertisement
101
Description
Selection
Default
Programming
Conditions
Feature Reference
4-24
System Programming
4.2
Station Hunting Type
Used to set the Station Hunting type for each extension group.
There are two Station Hunting types available: Circular and
Terminating. If circular is assigned for a group, all of the extensions
in the group are searched one time until an idle one is found. If
terminating is assigned, searching stops at the extension which has
the highest jack number in the group.
• Extension group number: 1 – 8,
• Terminate (terminating) / Circular
All extension groups – Terminate
1.
Enter 101.
Display: Hunting Type
2.
Press NEXT.
Display: Group NO? →
3.
Enter an extension group number.
Pressing NEXT also can enter extension group number 1.
Display example: Group1:Terminate
4.
Keep pressing SELECT until the desired selection is
displayed.
5.
Press STORE.
6.
To program another extension group, press NEXT or PREV,
or SELECT and enter the desired extension group number.
7.
Repeat steps 4 through 6.
8.
Press END.
• Program [600] "Extension Group Assignment" is used to assign the
extension group members.
• If all extensions are busy, a busy tone will be heard.
Section 3, Features
Station Hunting
System Programming
(
= all extension groups)
Hide quick links:
Advertisement
Table of Contents
