Programming The Remote Control - Sony TRINITRON KD-34XBR2 Service Manual
Trinitron color television
Hide thumbs
Also See for TRINITRON KD-34XBR2:
- Training manual (113 pages) ,
- Operating instructions manual (86 pages) ,
- Service manual (47 pages)
Table of Contents
Advertisement
Other Information
Programming the Remote Control
64
The remote control is preset to operate Sony brand video equipment.
Sony
Equipment
Beta, ED Beta VCRs
8 mm VCR
VHS VCR
DVD Player
If you have video equipment other than Sony brand that you want to
control with the DTV's remote control, use the following procedures
to program the remote control.
✍
3
The equipment must have infrared (IR) remote capability in order to be used
2
with the remote control.
1
Check the list of the "Manufacturer's Codes" listed on page 66,
and find the three-digit code number for the manufacturer for
your equipment. (If more than one code number is listed, start
with the number listed first.)
2
Open the lid on the remote control. Then move the slide switch to
one of the four positions (AV1, AV2, AV3, DVD).
3
Press
CODE SET
✍
You must perform step 4 within 10 seconds of step 3.
4
Close the lid on the remote control and enter the three-digit
manufacturer's code number.
5
Press
.
ENTER
5
6
To check if the code number works, aim the DTV's remote control
at the equipment and press the green
6
corresponds with that equipment. If it responds, you are done. If
not, try using another code listed for that manufacturer.
Switch Position
on Remote Control
AV1
AV2
AV3
DVD
.
Programmable
Code Number
303
302
301
751
button that
POWER
Hide quick links:
Advertisement
Chapters
Table of Contents
