Samsung OfficeServ 7100 Technical Manual page 105
Hide thumbs
Also See for OfficeServ 7100:
- Technical manual (330 pages) ,
- Service manual (291 pages) ,
- Installation manual (103 pages)
Advertisement
OfficeServ 7100
TECHNICAL MANUAL
CID TO SLT:
NO RCL FLASH:
RBK STN NAME:
GLISTEN SPKR
PROGRAM KEYS
UP & DOWN
Used to scroll through options
KEYPAD
Used to enter selections
SOFT KEYS
Move cursor left and right
SPEAKER
Used to store data and advance to next MMC
HOLD
Used to clear previous entry
ANS/RLS
Used to select ALL
ACTION
1. Press TRANSFER 300
Display shows
2. Dial station number (e.g., 205)
OR
Press UP or DOWN to select station
OR
Press ANS/RLS for all and press RIGHT soft
key to move cursor.
3. Press UP or DOWN to select feature and
press RIGHT soft key to move cursor.
4. Dial 1 for ON or 0 for OFF
OR
Press UP or DOWN to select and press
RIGHT soft key.
MMC: 300
System provides Caller ID to SLT.
If ON and an SLT hook flashes and does not dial and hangs
up, then the call will disconnect. If OFF the call will recall. The
same applies if a keyset transfers and hangs up without
dialling a station. Typically not used in the US market.
If ON, the called station's name is displayed while ringing
(Intercom calls only).
When set to ON for a station, that station may turn the Group
Listen feature on by pressing the speaker key at any time
during the call. This will cause the call to be heard through
the handset or headset as well as the speakerphone.
Home Page
PROGRAMMING
PART 2 MAY 2009
DISPLAY
[201] CUS.ON/OFF
ACCESS DIAL :ON
[205] CUS.ON/OFF
ACCESS DIAL :ON
[ALL] CUS.ON/OFF
ACCESS DIAL :ON
[ALL] CUS.ON/OFF
ACCESS DIAL :ON
[ALL] CUS.ON/OFF
ACCESS DIAL :OFF
Table of Contents
Advertisement
