Description Of The Machine - Miele G 7881 Operating Instructions Manual
Washer-disinfector
Hide thumbs
Also See for G 7881:
- Installation and operating instructions manual (76 pages) ,
- Operating instructions manual (64 pages)
Table of Contents
Advertisement
Description of the machine
This washer-disinfector can be used to
clean, rinse and thermally disinfect a
wide range of reusable medical
products used in dental surgeries.
Follow the medical product
manufacturer's instructions (according
to EN ISO 17664) on how to process
their items by machine.
Medical products that can be
processed in this machine include
dental instruments, suction apparatus,
transfer instruments, etc.
Processing instruments by machine
achieves reproducible results and
should be used in preference to
processing them by hand.
Disinfection should be carried out
thermally where possible, e.g. using the
DESIN vario TD programme.
The parameters for thermal disinfection
according to EN ISO 15883-1 (A
are 90 °C (+ 5 °C, - 0 °C) with a holding
time of 5 minutes. The effective area
A
3000 is suitable for inactivating the
0
HBV virus.
National health and safety regulations
regarding disinfection must also be
observed.
10
The cleaning programme as well as any
chemical agents must be chosen
according to the type of soiling and
load being processed.
The cleaning result must ensure that
the instruments have been disinfected
correctly, that no residues are left
behind, that subsequent sterilisation
can be carried out and that the
instruments can be used again safely.
Medical products are best reprocessed
using the DESIN vario TD programme.
The use of a suitable carrier (basket,
module, insert etc.) is important to
ensure the adequate cleaning of
instruments and appliances. Examples
are given in the section "Areas of
application".
The washer-disinfector is programmed
to carry out the final rinse with mains
3000)
0
water or with processed water
(optional) of a quality to suit the
application (e.g. aqua destillata,
purified water, de-ionised water,
demineralised water).
The machine complies with EN ISO
15883 for validation purposes.
Hide quick links:
Advertisement
Table of Contents
