Outbound Ip Connection - NEC Univerge SV8100 Features And Specifications Manual

Hide thumbs Also See for Univerge SV8100:

Table of Contents

UNIVERGE SV8100

Outbound IP Connection

Outbound IP Connection for PC Programming allows the system to make

outgoing call over IP, to a pre-programmed IP Address, upon receipt of an incoming CO call matching a

pre-programmed CLI. When the target number of DID incoming call matches with the service code of

'Outbound IP Connection' the SV8100 compares the received CLI with the registered CLI (Program

90-69-03). When the received caller ID and registered caller ID match, the SV8100 sends a TCP

establishment request to a waiting PCPro application. When the caller ID does not match, the call will

either step to the locations in Program 22-11-05 and Program 22-11-06 if configured or, send a busy tone

to the caller. Alternatively, via dialing service code from a Multiline Terminal, an outgoing IP connection

can be made to a waiting PCPro terminal with a pre-programmed IP Address. This allows for a

pre-authorized connection for programming purposes without using CO Lines and potentially reducing

the cost of calls for maintenance. The outgoing IP call connects by sending a TCP establishment request

to a waiting PC Programming terminal. A fixed, encrypted, user ID and password are used to verify the

If an unsuccessful connection attempt is made, this can be output as an alarm.

Version 6.00 or higher SV8100 system software is required for Outbound IP Connection

for PC Programming.

R6 PC Programming or higher is required for Outbound IP Connection for PC

Programming.

Outbound IP Connection for programming is not available when an existing WebPro/PCPro

or station programming session is active.

SV8100 changes the port number of TCP at each connection. The range used is

61050~61099.

Outbound IP Connection Service code can be dialed across CCIS.

Outbound IP Connection to a secondary side of Net-Link is not supported.

Default Setting

PC Programming

a PC Pro Connection via

Table of Contents