5.
Press NEXT to program baud rate.
Display example: Baud Rate:9600
6.
Keep pressing SELECT until the desired selection is displayed.
7.
Press STORE.
8.
Press NEXT to program word length.
Display example: Word Lengt:8bits
9.
Keep pressing SELECT until the desired selection is displayed.
10.
Press STORE.
11.
Press NEXT to program parity bit.
Display example: Parity:Mark
12.
Keep pressing SELECT until the desired selection is displayed.
13.
Press STORE.
14.
Press NEXT to program stop bit.
Display example: Stop Bit:1bit
15.
Keep pressing SELECT until the desired selection is displayed.
16.
Press STORE.
17.
Press END.
Conditions
• The following combinations are invalid.
Parity
Mark
Space
Space
• The program address of the out-of-service system port is unacceptable.
Features Guide References
Station Message Detail Recording (SMDR)
Programming Guide
Word Length
Stop Bit
8
8
8
2
1
2
General Programming
349