NEC Univerge SV8100 Features And Specifications Manual page 812
Hide thumbs
Also See for Univerge SV8100:
- Features and specifications manual (2210 pages) ,
- Features & specifications manual (1174 pages) ,
- Programming manual (986 pages)
Table of Contents
Advertisement
Issue 1.0
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.
Level 2 – these are the next most commonly assigned programs for this feature.
Level 3 – these programs are not often assigned and require an expert level working knowledge of
the system to be properly assigned.
Program
Program Name
Number
11-12-03
Service Code Setup (for Service
Access) – Override (Off-Hook
Signaling)
11-16-04
Single Digit Service Code Setup –
Intercom Off-Hook Signaling
15-02-12
Multiline Telephone Basic Data
Setup – Off-Hook Ringing
15-07-01
Programmable Function Keys
20-06-01
Class of Service for Extensions
20-09-07
Class of Service Options
(Incoming Call Service) – Call
Queuing
20-13-05
Class of Service Options
(Supplementary Service) –
Intercom Off-Hook Signaling
2 - 788
Description/Comments
Assign a service code (709 by
default) to be used for Off-Hook
Signaling Override.
Assign a one-digit service code to
be used for Off-Hook Signaling.
For each extension, set Off-Hook
Ringing type: 0 (muted), 1 (none), 3
(beep in speaker), 4 (beep in
handset), 5 (Speaker & Handset
Beep). DID, DNIS and DIL trunks
can use any of the four options -
normal/ring group trunks can only
use options "0" or "1".
Assign a function key for Off-Hook
Signaling (code 33).
Assign a Class of Service (1~15) to
an extension.
Turns Off (0) or On (1) an extension
ability to have calls queued if a call
rings the extension when it is busy.
Must be set to 1 to enable
automatic Off-Hook Signaling.
Turns On (1) or Off (0) the ability of
an extension to receive Off-Hook
Signals.
UNIVERGE SV8100
Assigned Data
MLT, SLT
(default = 709)
(default = )
0 = Muted Off-Hook
Ringing
1 = No Off-Hook Ringing
2 = Not Used
3 = Beep in Speaker (SP)
4 = Beep in Handset (HS)
5 = Speaker & Handset
Beep
(default = 5)
Line Key 1~48
0~99 (Normal Function
Code 751 by default)
00 ~ 99 (Appearance
Function Code) (Service
Code 752 by default)
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension port =
Class 1
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
Off-Hook Signaling
Level
1
2
3
- Quick Links:
- Station Hunt
Hide quick links:
Advertisement
Table of Contents
