3.
Perform setting.
Auto Patrol No.
Auto Patrol operates in the sequence of these
numbers.
4.
Close the window.
When setting is complete, click
1
Set the mode. Setting can be performed
from Modes 1 to 3.
Click the tab of the respective mode for
setting.
2
Set the Position Number.
For each Patrol Number, set a Position
Number to move to in sequence.
3
Set the time interval.
Set the time for displaying each position
2
set in
.
(Unit: seconds)
to close the window.
Note
For starting and stopping operations of
Auto Pan, Auto Patrol and Auto Trace,
please refer to Page 55.
73