30
AP-7131 Series Access Point: Installation Guide
5. Select the Quick Setup screen's
WAN or LAN configuration values. The WAN tab displays by default.
a. Select the
access point and a larger network or outside world through the WAN port. Disable this
option to effectively isolate the access point's WAN connection. No connections to a
larger network or the Internet will be possible. MUs cannot communicate beyond the
configured subnets.
b. Select the
point WAN connection. This is useful, if the target corporate network or Internet Service
Provider (ISP) uses DHCP. DHCP is a protocol that includes mechanisms for IP address
allocation and delivery of host-specific configuration parameters from a DHCP server to
a host. Some of these parameters are IP address, network mask, and gateway.
NOTE
Network Configuration
Enable WAN Interface
This Interface is a DHCP Client
Motorola recommends the WAN and LAN ports should not both be
configured as DHCP clients.
tab to define a minimum set of
checkbox to enable a connection between the
checkbox to enable DHCP for the access