Epson Stylus Pro 7700 Service Manual page 294
Large format color inkjet printer
Hide thumbs
Also See for Stylus Pro 7700:
- Service manual (440 pages) ,
- Network manual (43 pages) ,
- Unpacking and setup manual (30 pages)
Table of Contents
Advertisement
Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908
4.4.6.9 AID Board
When powering this product, high-voltage current may be applied
W A R N I N G
on the AID Board. To prevent ELECTRIC SHOCK, do not touch
the AID Board when the power is ON. If the shock should happen,
the flowing current is very tiny, about a few hundreds μA, therefore
it will not do any harm on the human body.
The shape of the AID Board and the parts around it differs
C A U T I O N
depending on the production timing, therefore, check the shape of
them and take proper procedures when disassembling/assembling
this printer.
"Disassembling procedure for the previous type before
design change" (p294)
"Disassembling procedure for the new type after design
change" (p296)
- Previous type -
Main body
- New type -
Main body
DISASSEMBLY & ASSEMBLY
1.
2.
3.
4.
5.
AID Board
AID Board
Disassembly and Assembly Procedure
Disassembling procedure for the previous type before design change
Remove the Control Panel.
(p203)
Remove the IC Cover R and the IC Shaft Cover R.
Remove the Maintenance Tank R.
(p208)
Remove the Right Cover.
(p209)
Remove the two screws that secure the AID Board Cover, and remove the AID
Board Cover.
A) Silver, Phillips, Bind S-tite M3x8: two pieces
- Top right -
AID Board Cover
Figure 4-147. Removing the AID Board Cover
Revision I
(p206)
A
294
Confidential
- Quick Links:
- Service Manual
- Serviceman Mode
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
