Beeper
Display
Scan LED
Indicator
(red/green)
Trigger
MC3090G Mobile Computer
Figure 1-4
Mobile Computer Startup
To start using the mobile computer:
Install the main battery.
•
Charge the main battery and the backup battery.
•
Start the mobile computer.
•
Install Main Battery
If the main battery is charged, the mobile computer can be used immediately. If the main battery is not charged,
see
Battery Charging on page
To install the main battery:
Rotate the latches to the open position.
1.
Do not lift up on the latches when removing the Strap/Door Assembly. Lift up on the Hand Strap only.
CAUTION
Pull on the strap to lift the Strap/Door Assembly off, bottom first.
2.
Scan LED
Charge LED
Indicators
Indicator
(red/green)
(amber)
1-7. To remove the main battery, see
Getting Started
Indicator LED Bar
Scan Button
Keypad
Power
Main Battery Removal on page
1 - 5
1-11.