Table of Contents
Advertisement
These servicing instructions are for user by qualified personnel only. To reduce the risk of
electrical shock, do not perform any servicing other than that specified in the operating
instructions unless you are qualified to do so.
Be sure to use appropriate service parts listed in the replacement parts list and tools when
you repair the solar power conditioner. Never alter the solar power conditioner as it may
cause an electrical shock, heat or fire.
If you have to take the solar power conditioner to be repaired, be sure to turn off AC and DC
input breaker for the solar power conditioner on the load center in advance. Otherwise, it
may cause an electrical shock.
Be sure to confirm that the inside of the solar power conditioner is not in high temperature
before repairing. Otherwise, it may cause burn.
PV module always supplies the DC voltage of 60V to 350V on daytime (particularly sunny
day). Be careful when treating the cable from the PV module. Otherwise, it may cause an
electrical shock.
Do not repair the solar power conditioner with wet hands. Otherwise, it may cause an
electrical shock.
Make sure to be earthen if the solar power conditioner is repaired in wet place. Otherwise, it
may cause an electrical shock.
Be sure not to touch the live parts when you repair the solar power conditioner.
Do not water electrical components of the solar power conditioner. Otherwise, it may cause
an electrical shock.
Be sure to stop the operation of the solar power conditioner and turn off breakers when you
clean the solar power conditioner.
If you move the solar power conditioner, be sure to follow the instructions on the
"INSTALLATION & OPERATION MANUAL" for the relevant model. If the wall on which the
solar power conditioner is installed is weak or the solar power conditioner is improperly
installed, it may fall and cause injury.
WARNING
3
Hide quick links:
Advertisement
Table of Contents
