Checking The Measurement Results - Yamaha Aventage RX-A3040 Owner's Manual
Av receiver
Hide thumbs
Also See for Aventage RX-A3040:
- Quick manual (8 pages) ,
- Additional information (8 pages) ,
- Setup manual (2 pages)
Table of Contents
Advertisement
1 2 3 4 5 6 7 8 9 10
Cursor keys
ENTER
5
Use the cursor keys to select "Save/Cancel" and
press ENTER.
• To check the measurement results, select "Result". For details, see
"Checking the measurement results" (p.55).
6
To save the measurement result, use the cursor
keys to select "SAVE" and press ENTER.
The adjusted speaker settings are applied.
• To finish the measurement without saving the result, select "CANCEL".
7
Use the cursor keys (e/r) to select "YES" or "NO"
to enable/disable YPAO Volume and press ENTER.
• If YPAO Volume is enabled, the high- and low-frequency levels are
automatically adjusted according to the volume so that you can enjoy
natural sounds even at low volume.
• You can also enable/disable YPAO Volume in "YPAO Volume" (p.108) in the
"Option" menu.
8
Disconnect the YPAO microphone from the unit.
This completes optimization of the speaker settings.
Caution
• The YPAO microphone is sensitive to heat, so should not be placed anywhere
where it could be exposed to direct sunlight or high temperatures (such as on
top of AV equipment).
Checking the measurement results
You can check the YPAO measurement results.
1
After the measurement, use the cursor keys to
select "Result" and press ENTER.
• You can also select "Result" from "Auto Setup" (p.121) in the "Setup" menu,
which displays the previous measurement results.
The following screen appears.
1
1
Measurement result items
2
Measurement result details
3
The number of measured positions (when multi
measure is performed)
PREPARATIONS ➤ Optimizing the speaker settings automatically (YPAO)
2
3
55
En
Hide quick links:
Advertisement
Chapters
Table of Contents
