Hitachi CJ 14DL Technical Data And Service Manual page 21
14.4/18 v cordless jig saw
Hide thumbs
Also See for CJ 14DL:
- Safety & instruction manual (64 pages) ,
- User manual (54 pages) ,
- Handling instructions manual (56 pages)
Table of Contents
Advertisement
5. Removal of the gear holder and the motor
(1) Pull out the Connecting Piece [32] and the Needle Bearing [33] from the Gear [34].
(2) Remove the Retaining Ring for D7 Shaft [31] from the tip of the spindle.
(3) Remove the Gear [34], Balance Weight [35], Orbital Cam [36] and Washer (A) [37] in order.
(4) Pull out the Ball Bearing 608VVC2PS2L [19] and the Motor DC 14.4 V [20] (or the Motor DC 18 V [20])
press-fitted in the Gear Holder [38].
Removal of the gear holder and the motor DC 14.4 V (or the motor DC 18 V)
Connecting
Piece [32]
Retaining Ring
]
for D7 Shaft [31
6. Removal of the DC-speed control switch and the wiring of motor
(1) Remove the Pushing Button [3] and the Switch Ass'y [54] (including the LED [2], DC-Speed Control
Switch [4] and Terminals [15] [17]) from the housing.
(2) Cut the lead wire (red) and the lead wire (black) wired from the LED [2] to the DC-Speed Control Switch
[4].
(3) Cut the lead wire (red) and the lead wire (black) wired from the Motor DC 14.4 V [20] (or the Motor
DC 18 V [20]) to the DC-Speed Control Switch [4].
(4) Cut the lead wire (blue) and the lead wire (brown) wired from the DC-Speed Control Switch [4] to the
Terminals [15] [17].
Removal of the DC-speed control switch and the wiring of motor
Pushing Button [3]
LED [2]
Needle Bearing [33]
Gear [34]
Balance Weight [35]
Orbital Cam [36]
Motor DC 14.4 V [20]
(Motor DC 18 V [20])
Washer (A) [37]
Gear Holder [38]
DC-Speed Control Switch [4]
-18-
Ball Bearing
608VVC2PS2L [19]
Motor DC 14.4 V [20]
(Motor DC 18 V [20])
Terminal [17]
Terminal [15]
Advertisement
Table of Contents
