Tool Retainer; Adjusting Mechanism For The Tool Swivel Angle; Side Handle - Hitachi H 45MR Technical Data And Service Manual
Hitachi h 45mr electric hammer - technical data and service manual
Hide thumbs
Also See for H 45MR:
- Safety instructions and instruction manual (52 pages) ,
- Handling instructions manual (46 pages) ,
- Handling instructions manual (30 pages)
Table of Contents
Advertisement
8-6. Tool Retainer
The Model H 45MR is equipped with a slide-type tool retainer. Tools can be attached and detached just by pulling
grip (A). While pulling grip (A) in
position by turning the tool and push it in to the end. Lock the tool by returning grip (A) back to the original
position.
8-7. Adjusting Mechanism for the Tool Swivel Angle
The tool swivel angle can be easily changed in 12 steps. The tool swivel angle can be set freely to the desired
position by pushing out grip (B) ahead in
8-8. Side Handle
The side handle can be adjusted by 360˚ rotation and also allows operation from front to rear. Loosen the handle
by turning the grip in
A
fix the side handle. (Fig. 11)
direction, insert the tool in the hole of the front cap (Fig. 9). Adjust the groove
A
Grip (A)
Tool shank
A
direction and then turning grip (A) in
A
Grip (B)
direction and adjust the handle to a convenient position. Turn the grip in
A
Front cap
Fig. 9
B
C
Grip (A)
Fig. 10
Grip
B
A
Fig. 11
--- 12 ---
or
direction. (Fig. 10)
B
C
direction to
B
Advertisement
Table of Contents
