Setting The Print Size To Be Displayed (Print Size List) - Sony UPX-C200 Operating Instructions Manual
Digital printing system
Hide thumbs
Also See for UPX-C200:
- Operating instructions manual (208 pages) ,
- Brochure & specs (16 pages) ,
- Brochure & specs (22 pages)
Table of Contents
Advertisement
To revise the exposure easily
The exposure can easily be changed by pressing v or V
of the control button. When the button is pressed, the
value displayed on the LCD changes.
Using this method, you can change the exposure even
when the menu has been locked.
For details on the menu lock, see "Locking the Menu of
the Camera" on page 51.
Adjusting the white balance (W.B.)
1
Display the Menu display.
For details on displaying the Menu display, see
"Displaying the Menu display in CAMERA mode"
on page 34.
2
Select W.B. by pressing v or V of the control
button.
3
Press ENTER of the control button.
The White Balance display appears.
4
Select the method for adjusting the white balance
by pressing v or V of the control button.
AUTO: The white balance is adjusted
automatically.
One Push: The white balance is adjusted for the
lighting conditions when this option is selected.
Under the same lighting conditions as shooting
a picture, display a white subject in the center of
the LCD. Then press the release button or
ENTER of the control button. The white
balance for the lighting conditions will be
automatically adjusted.
3000K to 7000K: Select the color temperature
according to the lighting conditions, and the
white balance is adjusted for the selected
temperature.
5
Press ENTER of the control button.
The white balance is adjusted, and the Menu
display is retrieved.
Canceling the modification
If you wish to cancel the setting on any setting display
and return to the Menu display, press b of the control
button. Your setting is canceled, and the Menu display is
retrieved.
Setting the Print Size to be
Displayed (PRINT SIZE LIST)
The print size selectable with the SIZE button can be set
in the SETUP menu. Set the sizes frequently used; then
you can select the desired size easily.
At the factory, all sizes are set selectable. Set the sizes
you wish to select with the SIZE button with the
procedures below.
As for the printouts of the selected size, see "Printouts
that Can Be Made with This System" on page 8.
You can select the unit of size, mm or inch.
For details, see "Setting the Size Units (SIZE UNIT)" on
page 48.
3,5,7
1
Display the Setup display.
For details on displaying the Setup display, see
"Displaying the Setup display" on page 34.
2
Select PRINT SIZE LIST by pressing v or V of the
control button.
3
Press ENTER of the control button.
The Print Size display appears.
4
Select the size that is not to be displayed by
pressing v or V of the control button.
5
Press ENTER of the control button.
The display of the size selected in step 4 changes
from black to gray.
Repeat steps 4 and 5 to make the display of the
sizes that is not to be selected with the SIZE button
gray.
P LA Y
C A M E
R A
W
T
M E N U
M O N IT
E N TE
O TR
R
(P A L)
LC D
V ID E O
O U T
2,4,6
Various Functions
41
Hide quick links:
Advertisement
Table of Contents
