8
Select "Mode" (if necessary).
The communication mode of the SSID selected in "Site Survey" are automatically selected.
The settings can be changed by moving the highlight to the "Mode" field and pressing the
button.
• "Infrastructure"
• "802.11 Ad Hoc"
Example of connection when
"Mode" is "Infrastructure"
Access
point
Wired LAN
Example of setting 2
9
Select "WEP" page (if necessary).
13
Proceed to step
<1> Use the
The "WEP" page will be displayed.
••••••••••••• This is selected if communication is performed with two or more
devices connected by wired or wireless LAN via an access point.
••••••••••• This is selected to perform peer-to-peer communication between
the projector and a personal computer by using only wireless
LAN.
if WEP is not set.
button to select the "Network Type" tab, and press the
button to highlight the "WEP" tab.
7. Setting the LAN Setting of Projector
Example of connection when
"Mode" is "802.11 Ad Hoc"
35