FIG. 1
OPERATION
Installing and Removing the Battery Pack
H
NOTE: Make sure your battery pack is fully charged.
G
CAUTION: To prevent inadvertant operation, lock trigger switch before removing or
installing battery.
To install the battery pack into the tool handle, align the base of the tool with the
F
notch inside the tool's handle and slide the battery pack firmly into the handle until
you hear the lock snap into place (Fig. 2).
To remove the battery pack from the tool, press the release buttons (I) and firmly pull
the battery pack out of the tool handle. Insert it into the charger as described in the
charger section of this manual.
A
E
FIG. 2
B
C
I
D
D
I
Trigger Switch (Fig. 1)
To turn the tool on, squeeze the trigger switch (B). To turn the tool off, release the
trigger switch. Your tool is equipped with a trigger switch lock-off (C) to safeguard
against inadvertent release of material.
8