Removing The Hard Disk Drive (User-Replaceable); Figure 2-3. Removing The Hard Disk Drive; Table 2-5. Hard Disk Drive Replacement Part Numbers - HP OmniBook 7100 Service Manual

Hp pc

Hide thumbs Also See for OmniBook 7100:

Table of Contents

Removing the Hard Disk Drive

(User-Replaceable)

Description

Drive, hard disk (6.4GB, IBM)

Drive, hard disk (8.1GB, IBM)

Required Equipment

• Small Phillips screwdriver.

Removal Procedure

1. Unplug the ac adapter, if present, and remove the battery.

2. Turn the unit bottom side up.

3. Use a key or flat-blade screwdriver to pop up the hard drive handle.

4. Slide the hard drive toward the front, then lift it out.

5. If you are installing a new hard drive that does not have a plastic case, you can remove the case

parts from the old hard drive:

• Unsnap the two plastic snaps next to the connector and remove the plastic tray.

• Remove the four screws from the sides of the shield.

• Remove the hard drive from the shield.

• Unplug the connector from the hard drive.

HP OmniBook 7100

Part Number

Exchange

Part Number

0950-2829

F1440-69100

0950-2830

F1449-69100

Removal and Replacement

2-5

Table of Contents

Troubleshooting