Kenwood Nexedge NX-200G Instruction Manual page 32

Vhf/uhf digital transceiver

Hide thumbs Also See for Nexedge NX-200G:

Table of Contents

STATUS MESSAGE

You can send and receive Status messages which may be

decided in your talk group. Messages can contain up to 16

alphanumeric characters.

A maximum of 15 received messages can be stored in the

stack memory of your transceiver.

■ Transmitting

1 Select your desired zone and channel.

2 Press the key programmed as [Status] to enter Status

mode (proceed to step 5) or [Selcall + Status] to enter

Selcall mode (proceed to step 3).

3 Press

•

You can enter a station ID by using the DTMF keypad, or

by using

4 Press

5 Press

•

You can enter a status ID by using the DTMF keypad, or by

using

6 Press the key programmed as Call 1 to Call 6 to initiate

the call.

■ Receiving

A calling ID or text message will appear when a Status call

is received. Press any key to return to normal operation.

to select the station you want to call.

to enter Status mode.

to select the status you want to transmit.

(refer to step 3, above).

Table of Contents

Nexedge nx-300g