Sony IPELA PCS-G70 Operating Instructions Manual page 242
Video communication system
Hide thumbs
Also See for IPELA PCS-G70:
- Operating instructions manual (236 pages) ,
- Operation manual (174 pages) ,
- Integration manual (86 pages)
Table of Contents
Advertisement
1
Select "Detail Dial" in the launcher menu to display the Dial menu.
2
Select "SIP" under "Line I/F".
3
Enter the address of a remote party in the IP text box.
The format of the address may be the following:
• 4000 (number assigned by the SIP server)
• 4000@sip.com
• 192.168.1.1 (when not using an IP address or SIP server)
4
Select "Dial", then press the PUSH ENTER button, or press the
CONNECT/DISCONNECT (
The system begins dialing the party entered in step 3. "Dialing" appears on the
monitor screen, and the ON LINE indicator (blue) on the Communication
Terminal blinks.
When the System connects to the system on the remote site, the message
"Meeting starts!" appears on the screen, and the ON LINE indicator stops
blinking and lights.
To dial the remote parties for a multipoint videoconference one by one
After staring communication with the remote party selected first, press the
CONNECT/DISCONNECT (
open the menu.
Disconnect
Hold
Transfer
Select "Phone Book" or "Dial" depending on the registration status of the next
remote party.
Select "Phone Book", then perform steps 2 and 3 of the procedure shown in
"To call a remote party registered in the Phone Book" on page 231, or select
242
Starting a Videoconference Using SIP
/
) button on the Remote Commander.
/
) button on the Remote Commander to
Phone Book
Dial
History
Cancel
Hide quick links:
Advertisement
Table of Contents
