Clearances From Appliance; Attachment Of The Water Heater - Sony VPL-CX75 Operation Instructions Manual
Hide thumbs
Also See for VPL-CX75:
- Operating instructions manual (30 pages) ,
- Service manual (129 pages) ,
- Protocol manual (74 pages)
Table of Contents
Advertisement
Available languages
Available languages
Clearances from Appliance
to Combustibles
R75LSi
R94LSi
Top of
6 inches **
Heater
(152 mm)
Back of
0 (zero)
Heater
Front of
6 inches
Heater
(152 mm)
Sides of
2 inches
Heater
(51 mm)
Ground/
12 inches
Bottom
(305 mm)
Vent
0 (zero)
* 4 inches (102 mm) for enclosed area; 1 inch (26 mm) for unenclosed area.
** 0 inches from vent components and condensate drain line.
The clearance for servicing is 24 inches in front of the water heater.
For closet installation: clearance is 6 inches (152 mm) from the front.
Attachment of the Water Heater
1. Identify the installation location and confirm that
the installation will meet all required clearances.
2. Securely attach the water heater to the wall using
any of the holes in the wall installation brackets
which are at the top and bottom of the water
heater. Ensure that the attachment strength is
sufficient to support the weight. Refer to the
weight of the water heater in the Specifications
section.
NOTE: Rinnai water heaters should be installed in an
upright position. Do not install upside down or on its
side.
18
to Non-
Combustibles
R75LSi
R98LSi
R94LSi
12 inches
2 inches **
(305 mm)
(51 mm)
0 (zero)
0 (zero)
6 inches
6 inches
(152 mm)
(152 mm)
2 inches
1/2 inch
(51 mm)
(13 mm)
12 inches
12 inches
(305 mm)
(305 mm)
4 inches * 0 (zero)
VB Series Indoor LS Manual
R98LSi
2 inches
(51 mm)
to side
0 (zero)
6 inches
(152 mm)
1/2 inch
(13 mm)
2 inches
(51 mm)
0 (zero)
to ground/bottom
to top
to front
wall installation
brackets
Advertisement
Chapters
Table of Contents
