Remote Control Settings; Record Settings - Philips DVDR1000 Instructions For Use Manual
Hide thumbs
Also See for DVDR1000:
- Owner's manual (68 pages) ,
- Instructions for use manual (64 pages) ,
- User manual (8 pages)
Table of Contents
Advertisement
Auto resume
The Auto resume setting only applies to pre-recorded
DVD-video and Video CD discs only - not only to the
disc in the recorder but also to the last twenty discs you
have played.
If Auto resume is set to 'On', playback will start from
the point where it was stopped the last time the disc
was played.
When Auto resume is set to 'Off', the recorder will
start playing from the beginning of a disc. In this case you
can still resume when
pressing 2 PLAY. Factory setting is 'On'.
PBC
This feature allows you to disable or enable the PBC
(Playback Control) menu of VCD discs. See under
'Special VCD features': Factory settings is 'On'.
Remote Control settings
Key sound
The recorder makes a 'beep' sound upon every key
command given via recorder or remote control keys.
Select 'Off' to disable this sound. Factory setting is 'On'.
Remote control used
If you want to use the remote control of a Philips DVD
player instead of the standard DVD recorder remote
control, select 'DVD player'. Factory setting is 'DVD
recorder'.
28 OPERATION
appears on screen by
Record Settings
Record mode
By selecting a recording mode you define picture quality
of recordings and maximum recording time for a disc.
Mode
Picture quality
HQ
best possible
(High Quality)
picture quality
SP
pre-recorded
(Standard Play)
DVD quality
LP
better than
(Long Play)
S-VHS picture quality
EP
better than
(Extended Play) VHS picture quality
For playback, the correct recording mode will
automatically be selected. Depending on the selected
mode the available recording time on a disc varies.
In the record settings menu, select 'Record mode'.
R e c o r d s e t t i n g s
R e c o r d m o d e
D i r e c t r e c o r d
S a t r e c o r d
A u t o c h a p t e r s
L P / E P r e c m o d e
Alter the recording mode with t or u (left right
cursor).
Confirm with the OK key.
To end, press SYSTEM MENU.
Direct record
With the Direct Record function switched On and the
DVD recorder switched to standby, the channel number
selected on your television will be automatically taken
over by the DVD recorder, at the moment it starts
recording. This only applies for televisions connected via
, Easy Link and N
TV
SCART
EX
Off.
In the record settings menu, select 'Direct record'.
Select On. If you select Off, the function will be
switched off.
Confirm with OK.
To end, press SYSTEM MENU.
Total recording
time
60 minutes
120 minutes
180 minutes
240 minutes
S P
O f f
O f f
O n
S t n d r d
T o e x i t p r e s s
S Y S T E M M E N U
Link. Factory setting is
IEW
Advertisement
Table of Contents
