Sony Bravia HDMI VPL-AW15 Operating Instructions Manual page 52
Hide thumbs
Also See for Bravia HDMI VPL-AW15:
- Operating instructions manual (76 pages) ,
- Specification sheet (2 pages) ,
- Operating instructions manual (75 pages)
Table of Contents
Advertisement
Symptom
Cause and Remedy
The picture is too dark.
-+
Adjust the contrast or brightness of the Picture
DJ
menu
properly.
(~page
41)
The picture is not clear.
-+
Adjust the focus using the focus ring.
(~
page 24)
-+
Condensation has accumulated on the lens. Leave the projector
for about 2 hours with the power on.
The picture flickers.
-+
Activate "APA", then adjust the current input signal.
-+
Adjust "Phase" for "Adjust Signal" in the Screen
EB
menu
properly.
(~
page 45)
On-screen display
Symptom
Cause and Remedy
On-screen display does not
-+
Set "Status" in the Setup
111;
menu to "On."
(~
page 46)
appear.
-+
Check if the
I/C)
(On/standby) indicator should light in green.
The model name does not
-+
The display mode of the projector may be set at the time of
disappear from the screen.
purchase. Consult with your local dealer or qualified Sony
personnel.
Remote control
Symptom
Cause and Remedy
The remote control does
-+
Batteries could be weak. Replace them with new batteries.
not work.
(~page
11)
-+
Insert the batteries with the correct polarities.
(~
page 11)
-+
If there is a fluorescent lamp near the remote control detector, the
projector may work improperly or inadvertently.
Others
Symptom
Cause and Remedy
The fan is noisy.
-+
Check the setting of "Cooling Setting" in the Setup
,1;:
menu.
(~page
46)
-+
Make sure that the room temperature is not too high.
The number of fan rotation increases to maintain the product
reliability of the projector's components in a room, where the
temperature is higher than normal. The fan noise becomes
slightly louder. The approximate normal temperature is 25°C.
52
- Quick Links:
- Replacing the Air Filter
Hide quick links:
Advertisement
Table of Contents
