Table of Contents
Advertisement
the lower part of the switch. They are installed in the same way. For more information, see
10.
The power cable management bracket installation procedure for the A10508 is the same as
•
A10508-V.
The power cable management brackets of the A10504 have a slightly different structure, and
•
installed in a similar procedure. For more information, see
To install a cable management bracket:
Unpack the cable management brackets.
1.
Attach the cable management bracket to the chassis, and align the screws with the screw holes on
2.
the chassis, as shown in
Fasten the screws.
3.
Figure 8 Installing cable management brackets on an A10508-V
(1) Attach the cable management bracket to the
chassis
(3) Screws for attaching the cable management
bracket to the chassis
(5) Power cable management bracket (installed at the lower part of the chassis)
Figure
10.
(2) Screw holes for installing the cable management
bracket
(4) Signal cable management bracket (installed at
the upper part of the chassis)
10
Figure
11.
Figure
Advertisement
Table of Contents
Troubleshooting
