Table of Contents
Advertisement
Available languages
Available languages
UHF Wireless Microphone System | Installation and User Instructions |
6
Operation
1 Turn the receiver ON by pressing the POWER
button. The LCD screen will light up.
2 Turn the handheld microphone or belt-pack ON.
3 Check whether the receiver and microphone are set
to the same frequency. The RF signal indicator
shows that the microphone is within range.
4 Talk into the handheld or lavalier microphone.
When talking into the microphone the AF signal
level indicator on the receiver will be activated.
5 Adjust the receiver volume control until the receiver
output level matches the sensitivity of the connected
amplifier or mixer.
6 The wireless microphone is now ready for use.
7 Check the battery status indicator to verify if there is
sufficient battery power available.
When the wireless microphone is not in use anymore,
turn off the wireless handheld microphone and belt-
pack to conserve battery power.
Bosch Security Systems | 2006-01 | 9922 141 50701ml
en | 18
Hide quick links:
Advertisement
Chapters
Table of Contents
