Connecting machine to power source
B
A
A
Changing the bulb
C
4
Attention:
Unplug power cord when machine is not
in use.
Attention:
Consult a qualified electrician if in doubt
as to connect machine to power source.
Unplug power cord when machine is not
in use.
The foot control must be used with the
appliance by KD-2902 (220-240V area)
manufactured by
FDM (zhejiang founder
motor corporation ltd, China).
Connect the machine to a power source as
illustrated.
Sewing light
Press main switch (A) for power and light on.
(" l ")
Foot control
Foot control regulates the sewing speed.
Disconnect the machine from the power
supply by removing the plug from the main
socket!
- Loosen screw (A) as illustrated.
- Remove the cover (B).
- Unscrew the bulb and fit new one (C).
- Replace the cover and tighten screw.
Should there be any problem. Ask your
local dealer for advice.
Silver Crest SNM 33 A1