Table of Contents
Advertisement
Maintenance
Lubricate the right, rear axle bearing
Pro 18 AWD
Clean the engine's cooling air intake
Clean the air filter's pre-cleaner
(foamed plastic)
Change the engine oil
1)
Clean the air filter's filter cartridge
(paper filter)
Check/adjust the cutting height
Check/adjust the parking brake
Inspect the flame proofing/spark arrestor
(extra equipment)
Replace the engine oil filter (every 200 hours)
Replace the hydraulic oil filter (every 200 hours)
Clean/replace the spark plugs
Change the inline fuel filter
Clean the pulse air filter
Clean the cooling fins
Check the play in the engine valves
Check the need of an oil change
replacement
5)
in the gearbox/hydraulic system
(every 200
6)
/500 hours)
Replace the suction filter in the hydraulic tank
(every 200 hours)
6)
Replace the air filter's pre-cleaner
(foamed plastic)
2)
Replace the air filter (paper filter)
(every 200 hours)
Perform the 300-hour service
1)
First change after 8 hours. When operating with a heavy load or at high ambient temperatures, replace
every 50 hours.
2)
Maintenance and replacement are required more often in dusty conditions.
use, the Rider should be lubricated twice weekly.
5)
Pro 18 only.
6)
Pro 18 AWD only. Replace first after 50 hours.
= Described in this operator's manual.
= Not described in this manual.
WARNING!
No service operations may be performed on the engine or cutting unit unless:
•
The engine has been stopped.
•
The ignition key has been removed.
•
The ignition cables have been removed from the spark plugs.
•
The parking brake is on.
•
The cutting unit is disengaged.
MAINTENANCE
Page
63
31
29+30
60
2)
29+30
45
26
-
62
5)
62
32
28
28
28
4)
-
4)
and filter
-
-
29+30
2)
29+30
4)
-
4)
Performed by an authorised service workshop.
Daily main-
At least
Weekly
3)
tenance
main-
before after
tenance
Maintenance
interval hours
once
50 100 300
25
a year
1)
1)
3)
With daily
English –
23
Hide quick links:
Advertisement
Table of Contents
