Dell PowerEdge M1000e User Manual page 29
I/o connectivity options for the dell poweredge m1000e blade enclosure m-series blade i/o guide
Hide thumbs
Also See for PowerEdge M1000e:
- Configuration manual (232 pages) ,
- Getting started (224 pages) ,
- Reference manual (135 pages)
Table of Contents
Advertisement
Cisco Catalyst Blade Switches
Adapters
Works with all 1Gb
Mezzanine cards and LOMs.
Functions with all 10Gb
Mezzanine cards and Select
Network Adapters
with the
exception of the Qlogic
8242-k, 8262-k, and
Brocade BR1741M-k.
Quad port GbE Mezzanine
cards or LOMs will function
and are fully supported with
this IO module. In such
configurations, only half of
the card's ports will be used
since the switch only has
one internal port per
adapter.
More details in
Adapter Portfolio section
Designed for I/O bays
A
1
/A
2
B
1
/B
2
C
1
/C
2
Dell M-Series Blade I/O Guide
29
Stacking Ports (supported on 3130G & 3130X models ONLY)
2x 64Gb StackWise Ports
(0.5m, 1m, 3m cables purchased separately for factory-installed blade switch)
GbE ports (all models)
Software Upgrades
IP Services Upgrade Available
Cisco SFP Modules
•GbE SFP RJ45 converter, Copper
TwinGig
•GbE SFP, LC connector, SWL (multimode)
Converter
•GbE SFP, LC connector, LWL (single mode)
(supports
2 x 1Gb SFP)
Two TwinGig
converters ship
by default in
each switch
module
CX4 cable, IB 4x connector
MMF, dual SC
10GBASE-
CX4 X2
Module
10GBASE-SR
X2 Module
(for 3130X)
or
10GBASE-LRM
Secondary
X2 Module
Management
Serial Port
(3130X only)
CVR-X2-SFP10G
Not sold by Dell –
3130X Modules
purchase elsewhere
CAT 5
Cables
connector
SFP+
Cisco Direct Attach
(Twin-ax copper)
1m: SFP-H10GB-CU1M=
3m: SFP-H10GB-CU3M=
OneX SFP+
5m: SFP-H10GB-CU5M=
Converter
Module
SFP+ Optical:
Cisco SR SFP+
(SFP-10G-SR=)
1/10GbE
CAT5
Cable
Fibre
Copper
Fibre
Hide quick links:
Advertisement
Table of Contents
