Table of Contents
Advertisement
Scrolling
Buttons to
Display
Press
press
Enter Calendar
then
Override
press
Salt Amount
LOCKED
press
Capacity K
then
Grain
press
press
Hardness
then
GPG
press
press
Select
then
Language
press
press
Clock Mode
then
press
press
Units of
then
Measure
press
Injector
LOCKED
Selection
press
Backwash 1
then
press
press
Slow Rinse
then
press
press
Fast Rinse 1
then
press
press
Backwash 2
then
press
press
Fast Rinse 2
then
press
Operation
LOCKED
Type
press
Service
then
Interval
press
press
Chlorine
then
Generator
press
*Setting days between regeneration to zero will cause the system to not regenerate. This setting is used for selecting regeneration on
specific days or to use with a remote regeneration input. Regeneration on specific day is used to provide regeneration when water
demands are not steady. For example, if the weekdays have low usage and the weekend is high, then regeneration every three days
will not meet the requirements.
Description
1. Calendar Override*
Set the maximum days between
or
regenerations.
2. View Only
3. System Capacity in Kilo Grains
or
Refer to Table 1.
4. Hardness Grains per Gallon
Set based on measured
or
hardness.
5. Display Language
Scroll and select banner
or
language.
6. Clock
or
Select 12 hr or 24 hr.
7. Units of Measure
or
Select English or Metric.
8. View Only
9. First Backwash
or
DO NOT CHANGE
10. Slow Rinse
or
DO NOT CHANGE
11. First Fast Rinse
or
DO NOT CHANGE
12. Second Backwash
or
DO NOT CHANGE
13. Second Fast Rinse
or
DO NOT CHANGE
14. Valve Type
Displays valve type selected at
start-up. View Only.
15. Time between service reminder
Select number of months
or
between each service reminder.
14. Chlorine Generator Style
or
Select On or Off.
24
Range
0-99 days
1-140
3-200
1-8
12 or 24
0-1
Use factory settings
Use factory settings
Use factory settings
Use factory settings
Use factory settings
1-99 months
0 or 1 or 2
Hide quick links:
Advertisement
Table of Contents
