Table of Contents
Advertisement
② When using a CS-Mount lens
Please take off the lens protection cap and attach the
CS-Mount lens to the camera by screwing it in clockwise.
③ When using a C-Mount lens
Please take off the lens protection cap and attach the
C-mount adaptor.
2) Power
* Be sure to connect power only after all installation is complete.
* Please use a power adaptor that meets the required standards.
[Recommended - Voltage : +/-20%, Current : Adapter with
rated power of 2 times(than real using current ]
3) RS485(option)
*The camera can be controlled by using external controllers
like a remote controller.
* Connect the RS485 cable(+, -) to the connection port of the
485 control that is connected to the DVR or
System Controller.
* Use the PELCO-D protocol.
* When controlling RS485, please check the following:
- Communication Speed : 4800 bps
- Data Bit Number : 8 bits
- Stop Bit Number : 1 bit
- Parity Bit : none
VIDEO
U
L
R
D
POWER
+
+
RS 485
DC 12V
DC IRIS
AC 24V
RS485 -
RS485 +
DVR
Monitor
Advertisement
Table of Contents
