8
INSTALLING WEIGHT KIT
1. Bolt cast weight to weight brackets using
1¼ bolts and four nuts.
2. Slide both weight brackets over the front tube on
the frame. Be sure to position the weight assembly
in the center of the frame.
3. Secure with
/
-16 x 3½ bolts and four nuts.
3
8
3½ Bolt
CAUTION
DO NOT operate mower with grass
catcher without front weight installed.
ASSEMBLY
/
-16 x
3
8
Front Tube
Weight Plate
Weight Bracket
9
MOUNTING COVER ASSEMBLY
NOTE: Assistance from another person may ease
mounting the cover assembly to mower.
1. Lift and rotate cover to align the cover brackets
with support assembly tubes.
2. Slide the cover down over the support tubes until
secure.
10
INSTALLING SPACER PLUGS
1.
Remove plastic end caps from the center bag
support arm. Fully insert spacer plug into the end
of the support tube. It may be necessary to tap
the spacer into place with a hammer or mallet.
Replace the plastic end cap back over the spacer.
The additional extension will hold the hood more
securely when latched.
Insert spacer and
Remove center
replace cap
end cap
11