Table of Contents
Advertisement
Digital Multiplexer
CHAPTER 1.INTRODUCTION
Introduction
This unit can combine up to 16 Camera Images onto one VCR, and both frequent recording and
sequential recording can be possible in the unit of Frame and Field, and assigned channel can be
played back selectively, and it is Triplex with which Live Mode, Playback Mode, and Live plus Playback
Mode can be done in one monitor.
¥ System Setup Menu Button allows you to configure the system the way you want.
¥ Up to 16 asynchronous camera images can be connected.
¥ Up to 16 camera images can be combined onto one monitor so that multi-screen viewing is made
¥ Multi-view screen which supports simultaneous viewing of live cameras during playback of recorded
¥ 4xzoom is allowed.
¥ Built-in Video Motion Detection Function.
¥ Using Spot Output, specific screen can be monitored.
¥ With Freeze Function, you can view a still picture.
¥ With Auto Sequence Mode, each channel can be viewed sequentially.
¥ Date, Time, and Alarm Display Functions can be reset.
¥ For remote control, RS-232C or RS-485 Cable can be connected to PC.
¥ This unit can be powered from 100 to 240V AC.
¥ When Alarm Signal was input, the CHANNEL number, which indicates ALARM, is displayed with
¥ With the Channel Loss Detection function, if Channel Loss occurs, the CHANNEL number, which indi-
Functions and Features
possible.
scenes.
warning sound. Besides, if more than two ALARM signals occur simultaneously, you will have Multi
Mode with which several channels can be monitored at the same time.
Such ALARM information is recorded in ALARM LIST.
cates LOSS, is displayed. Such CHANNEL LOSS information is recorded in "ALARM/LOSS LIST."
1-1
Advertisement
Table of Contents
