Epson Stylus PHOTO 890 Service Manual page 66

Color ink jet printer
Hide thumbs Also See for Stylus PHOTO 890:
Table of Contents

Advertisement

EPSON Stylus Photo 890/1280/1290
Table 3-5. Remedies for Paper Out Error (continued)
Step
Problem
Check & Actions
3
Ditto
Check if the PE sensor is defective. Manually toggling the
actuator, measure the voltage at CN5/Pin 3. The correct
voltage levels are as follows:
4
The Maintenance
Hand-rotate the shaft in the ASF in the paper feed direction
SwitchMaintenance
and check if the hopper springs back every time you rotate
SwitchMaintenance
the shaft.
Switch is pressed and
NOTE: Even though the ASF HP sensor is working
the hopper appears to
properly, the hopper does not load paper if it is not
be working OK. But
operating at the correct timing. To solve that problem,
paper is not loaded.
disassemble and reassemble the ASF or replace it. In case
Then a Paper Out error
the ASF HP sensor detects the ASF home position during
is displayed.
paper feed sequence, the printer enters a fatal error
condition.
TROUBLESHOOTING
Overview
Revision C
66

Advertisement

Table of Contents
loading

This manual is also suitable for:

Stylus photo 1280Stylus photo 1290

Table of Contents