Connections - Yamaha DTR2 Owner's Manual

Professional series digital audio tape recorder

Hide thumbs Also See for DTR2:

Table of Contents

Connecting an analog audio component

•

Be sure to disconnect the power cords of both

components from the AC outlet before connecting.

•

The same channels of this unit and the other

component should be connected properly; right to

right, and left to left.

1 Connect the ANALOG INPUT jacks (balanced type or

unbalanced type) of this unit to the analog output jacks

of the amplifier or stereo mixer, etc.

2 Connect the ANALOG OUTPUT jacks (balanced type or

unbalanced type) of this unit to the analog input jacks

of the amplifier or stereo mixer, etc.

3 Set the ANALOG INPUT selector. When using the

balanced type terminals, set this selector to the XLR

position. When using the unbalanced type jacks, set

this selector to the PIN position.

NOTE:

Make sure all connections are securely made. Loose

connections may cause intermittent sound or noise.

CONNECTIONS

Table of Contents

Show Quick Links

Table of Contents