OPERATION INSTRUCTION
36
Programming - Simple Reservation
You can set the reservation conveniently in the units of 1 hour from 1 hour to 7 hours.
* When simple timer setup, product automatically runs or stops after the time that is set.
1
Press
button on the
Thermostat.
(the 'SIMPLE' segment will blink)
Press
button to adjust reservation
2
time.
Press
button to finish setting.
3
Press
button to exit.
4
❈ After setup, it automatically gets out
of setup mode if there is no button
input for 60 seconds.
❈ When exiting without pressing set
button, the manipulated value is not
reflected.
- If reservation is setup, 'sleep'
indication shows up at the lower part
of LCD screen.